02 / Explore · Tools05 / Menu · Tools

Noise generator

White, pink, brown, blue, violet and grey noise. Keep the volume low; when sleeping, keep the source away from your head.

Noise generator

01 · COLOUR

SLOPE: POWER PER HERTZ
Pink

02 · LEVEL AND TEXTURE

dB

03 · DURATION

Changing colour or texture while playing restarts the sound with a short crossfade; duration applies when you start again.

What should play in the background while I work?

The noise generator makes continuous noise in six colours right in your browser, on your own device: white, pink, brown, blue, violet and grey. The colour describes how the power is spread across frequencies; white sounds bright and hissy, pink balanced, brown deep and rumbling.

How to use the noise generator

  1. Pick a colour; if unsure, start with pink.
  2. Press Play and bring the level to a comfortable, low point; the level also changes while playing.
  3. Optionally turn on wide stereo, softening (cuts above 2 kHz) or slow waves; these apply when you stop and start again.
  4. Choose a duration (30 minutes to 8 hours): when it ends, the sound fades out over 30 seconds.
  5. Your setting lives in the address: save or share the link and the generator opens with the same colour and setting.

What is it used for?

  • Listen to the noise colours side by side

    Go from white to pink, then to brown: as the power spreads differently across frequencies, the sound moves from hiss to rumble. The table and the Lens SPECTRUM view show the difference between the colours together.

  • Cover up background sounds

    A steady noise can make office chatter and clicks stand out less (masking); this is a matter of sound physics. Keep the level just above the room's own sound and limit the time with the timer.

  • A timed background for the evening

    If you want a steady background sound before bed, the timer fades it out at the end of the time you set; it does not need to play all night. The evidence status of noise and sleep is on its evidence card.

  • Pink noise as a test signal

    Pink noise carries equal power in every octave, which makes it a common test signal for speaker and room tuning. Used together with the spectrum analyser, it gives a rough picture of your system's response.

How to read the results

  • The SPECTRUM lens shows the colour's slope: white is flat, pink falls 3 dB per octave, brown 6 dB; blue and violet rise.
  • If it sounds hissy or harsh, move to a darker colour (pink, brown) or turn on softening, which lowers everything above 2 kHz.
  • If you chose a duration, the sound fades out over 30 seconds when it ends; it doesn't cut off.
  • If the sound you want to cover is still audible, try a colour closer to its band: pink for speech, brown for rumble; change the colour rather than raising the level.

Colours

Slope is the change in power density (power per hertz) per octave. Grey noise is filtered with the inverse of the ISO 226 equal-loudness contour; its bass boost is limited to 20 dB.
ColourSlopeHow it sounds
White0 dB/octaveEqual power at every frequency; bright, close to a hiss.
Pink−3 dB/octaveEqual power in every octave; balanced, like rain.
Brown−6 dB/octaveLows dominate; deep and rumbling.
Blue+3 dB/octaveHighs dominate; thin and bright.
Violet+6 dB/octaveHighs dominate even more; very thin and hissing.
GreyInverse of the ear's curveReaches an average ear at roughly equal loudness at every frequency; varies from ear to ear.

Which colour should I choose?

Noise covers sounds in its own frequency band best. White or pink noise suits speech and high-pitched sounds; brown noise suits low sounds such as traffic or air-conditioning rumble. Colours with less treble (pink, brown) sound softer over long listening.

Evidence on how noise affects sleep and attention is limited and mixed; what studies found is in the noise colours guide and the evidence library. This tool only makes the sound; it makes no claim of effect.

Frequently asked questions

What is the difference between white noise and pink noise?
In white noise every hertz carries equal power; because the ear hears frequencies in octaves, it sounds bright. In pink noise every octave carries equal power; with less treble it sounds softer and more balanced.
Why does brown noise sound deeper?
Brown noise loses 6 dB of power each time the frequency doubles, so most of its energy is in the bass. That is why it sounds deep and muffled, like a waterfall or a distant rumble.
How loud should the noise be?
Comfortable and low. Turning it up to drown out every outside sound tires your hearing. A browser cannot know the real sound pressure reaching your ear; set the level by ear together with your device volume.
Can I leave it on while I sleep?
You can choose a duration (30 minutes to 8 hours); when it ends the sound fades out over 30 seconds. Keep it quiet while sleeping and place the speaker away from your head.
Does the sound stream from the internet?
No. The noise is generated live in your browser, on your own device: no audio file is downloaded, there is no loop and no account is needed.
How do I open brown noise directly?
Choosing a colour changes the address (e.g. ?renk=kahverengi). Save that link and the generator opens straight in that colour; you still press Play to start the sound.

· v1.15 · changelog

No cookies, no tracking. Details: Privacy notice (KVKK) On-device storage