02 / Explore · Tools05 / Menu · Tools

Octave Converter

Most oscillations in the universe are far too slow to hear. Double the frequency octave by octave, move it into the audible range and listen.

Convert

Ready examples

The mean 5-minute oscillation of the Sun's surface (Noyes 1963).

Input type

Each octave doubles the frequency; a negative value moves it down.

Source frequency
3.33 × 10⁻³ Hz
Factor
216 = 65,536
Output
218.5 Hz · A3 −12 cents
Time at the same factor
One period would last 4.58 milliseconds.

This is an octave shift: frequency and time change by the same factor, and the ratios are kept. What you hear is not the source's own sound but a copy of it moved into the audible range.

The calculation

The output frequency is f × 2ⁿ: moving n octaves up multiplies the frequency by 2ⁿ. If a period is T, the source frequency is 1 / T. The same factor also speeds up time: an oscillation moved up 2ⁿ times lasts 2ⁿ times shorter.

This is the simplest mapping that keeps the data's ratios; published sonifications often combine several layers and other mappings. The Sound of the Universe journey

How do I hear a frequency out of range?

The Octave Converter shifts a period or a frequency into the audible range by doubling it octave by octave: the output is f × 2ⁿ, and for a period T the source frequency is 1 / T. The presets range from the Sun's five-minute oscillation to the Perseus cluster's 9.6-million-year wave; the result can be played and shared as a link. It is arithmetic, not the sound of a celestial body.

How to use the Octave Converter

  1. Pick a preset or type your own number into the Period / Frequency input; for a period choose the unit (milliseconds, seconds, minutes, hours, days, years, million years).
  2. Press Shift into hearing range: the tool suggests the number of octaves that lands near 300 Hz; with the slider you can also choose between −12 and 80 octaves yourself.
  3. Read the source frequency, the factor (2ⁿ) and the output frequency; the 'Time at the same factor' line says how long one period would last at that factor.
  4. Listen with Play; if the output is outside 20 Hz-20 kHz, change the number of octaves first.

What is it used for?

  • Make the rhythms of the sky audible

    The Sun's five-minute oscillation or a pulsar's period is far slower or faster than the ear can hear; doubling octave by octave carries the same ratio to an audible pitch. The result is a calculation, not the sound of the object.

  • Show the octave in numbers

    Show a class in numbers that doubling a frequency raises it by an octave: the tool writes how many octaves (n) are needed and that the result is f × 2ⁿ.

  • Try an everyday period

    If you wonder which pitch a pendulum's, the tide's or the day's period lands on, enter the period; the tool finds its frequency (1 / T) and carries it into the audible range.

  • Share it in a sonification talk

    The result is kept in the address: you can share the pitch you found as a link or play it in a talk about turning data into sound.

How to read the results

  • Source frequency is 1 / T of the period; very small numbers appear in scientific notation: the Sun's 5-minute oscillation is 3.33 × 10⁻³ Hz. Factor is 2ⁿ, and Output is the two multiplied.
  • Move into the audible range puts the output in the octave closest to 300 Hz, so it lands between about 212 and 424 Hz. Raising the octave shift by one doubles the output; lowering it by one halves it.
  • The note and cents beside the output are the offset from the nearest equal-tempered note (218.5 Hz in the Sun example, 12 cents below A3). If the output is outside 20 Hz-20 kHz, no note appears and Play stays disabled.
  • Time at the same factor is one period of the output tone: the Sun's 5 minutes shrink to 4.58 milliseconds. What you hear is not the sound of the celestial body but a copy with frequency and time changed by the same factor; the arithmetic sets up no link or effect.

Presets

Source period or frequency and the shifted pitch; where the source gives no shift, the suggested one is used.
PresetSourceShiftOutput
Solar oscillation300 s (3.3 mHz)+16 octaves≈ 218 Hz
Earth day24 hours+25 octaves388.36 Hz
Earth year365.2 days+33 octaves≈ 272 Hz
Vela pulsar89.3 ms (11.2 Hz)suggestedaudible tone
TRAPPIST-1 b1.51 days+26 octaves≈ 514 Hz
Perseus cluster9.6 million years+57 octaves≈ 476 Hz
GW15091435-250 Hz0already audible

The arithmetic

One octave doubles the frequency; n octaves multiply it by 2ⁿ. Going from period to frequency is 1 / T: the 24-hour Earth day is 1 / 86,400 ≈ 0.0000116 Hz, and 24 octaves up, by a factor of 2²⁴ = 16,777,216, it becomes 194.18 Hz. The same factor also compresses time: an oscillation shifted up by 2ⁿ lasts 2ⁿ times less.

This is the simplest mapping that preserves the data's ratios: whatever the ratio of two periods, the ratio of the two pitches is the same. Published sonifications usually use other mappings alongside it; the tool shows just this one step.

The line between arithmetic and claim

'Cosmic octave' lists shift the periods of the Earth and the planets into the audible range in exactly this way; the arithmetic is correct. The idea that shifting a period by octaves creates a link with that celestial body, or that the resulting tone has an effect, has not been tested. The tool shows the numbers as the result of a calculation; it has no evidence level because it makes no claim.

Frequently asked questions

Why won't the output play?
If the output is outside 20 Hz-20 kHz the tool does not play it; increase or decrease the octave shift. The Shift into hearing range button picks a suitable number.
What are negative octaves for?
They bring a frequency too high to hear, such as ultrasound, down: each negative octave halves the frequency.
Is this the planet's 'own frequency'?
No. A planet has no sound frequency; it has an orbital or rotational period. The resulting tone is an octave multiple of that period, not a measurement or a sound recording.

· v1.15 · changelog

No cookies, no tracking. Details: Privacy notice (KVKK) On-device storage