Radio Observatory
A virtual radio telescope. Move the dish across the sky and tune the receiver; catch pulsars, hydrogen's 21 cm line and Jupiter's storms, and turn them into audible sound.
Radio Observatory
TARGET
DISH AND RECEIVER FOLLOWPULSARS
SPECTRAL LINE
SOLAR SYSTEM
BEYOND THE GALAXY
400MHz
PULSAR LISTENING
16× SLOWERReal speed is in the 4-40 Hz band: you start it, it lasts 4 s, only in this tool.
Crab Pulsar
SIMULATION- PERIOD
- 33.39 ms
- PER SECOND
- 29.95 turns
- SLOW MODE
- 16× slower · 1.87 pulses/s
- REAL SPEED
- 4 s sample
With each turn the beam sweeps the Earth once: each pulse is a click. The timing of the pulses is data; the click's timbre is our choice.
DATA · ATNF PULSAR CATALOGUE (MANCHESTER 2005), HEASARC COPY
Observing logbook
0 SIGNALSThe logbook is empty. When you lock on a signal, press “Add to logbook”.
The signals you catch stay on this device.
Turn into music
32 s · LOOP- Crab Pulsarrhythm · the period is slowed and becomes a beat · 1.069 sEXAMPLE
- Vela Pulsarrhythm · the period is slowed and becomes a beat · 0.715 sEXAMPLE
- Neutral hydrogen · 21 cmdrone · 22 octaves lower, plus the octave belowEXAMPLE
- Jupitertexture · swelling hissEXAMPLE
What does a pulsar sound like?
Radio Observatory is a virtual radio telescope: you point the dish at a source on the sky map, tune the receiver to the right frequency, and the captured signal is turned into audible sound. Pulsar pulses play at their real periods, hydrogen's 21 cm line as a pitch 22 octaves lower, Jupiter's storms as swelling hiss. These are not recordings from space: sound does not travel through the vacuum of space; the measured periods and frequencies of radio waves are turned into sound on this device.
How does the Radio Observatory work?
- Choose a source from the target list: the dish turns to it on the sky and the receiver tunes to a suitable frequency.
- Press Listen: the source's sound is heard within the receiver's hiss. Dragging the dish on the map (or using the arrow keys) makes the signal stronger or lets it fade.
- Change the receiver frequency with the slider or by dragging on the scale: each source is heard in its own band, and the waterfall draws the band over time.
- On a pulsar, the Real speed button plays the pulses at their real rate for 4 seconds, then returns to slow mode.
- Add the signal you are locked on to the logbook; Turn into music builds a 32-second piece from the signals in the logbook.
What is it used for?
Learn radio astronomy by listening
Point the dish at a pulsar and tune the receiver: the pulses are heard with their real periods. These are not recordings from space; measured periods are turned into sound.
Recognise the hydrogen line
Hydrogen's 21 cm line plays at a pitch 22 octaves lower; you get to know radio astronomy's best-known line by ear.
Hear why pointing matters
Drag the dish across the map and the signal grows or disappears; you understand by listening why aiming a telescope at its source matters.
Make music from your log
Add the signals you locked onto to the log; Turn into music builds a 32-second piece from them.
How to read the results
- If a name appears under the map, such as LOCKED · CRAB PULSAR, the dish is pointing at that source and the RECEIVER is in its band. SEARCHING means one of the two is off: pick the target from the list or move the dish closer. Add to logbook only works while locked.
- S/N (signal to noise) is a schematic measure of the total signal in the beam: the higher it gets, the stronger the signal; — means no signal in the beam. It is not a value a real telescope would measure; the RECEIVER strip is marked SCHEMATIC too.
- In the WATERFALL the horizontal axis is the receiver's band (BAND) and the centre line is the receiver frequency. A pulsar leaves repeating slanted lines: low frequencies arrive later. The 21 cm line is a narrow line; the Sun and a fast radio burst leave a trace falling from high to low.
- Under PULSAR LISTENING, a reading such as 16× SLOWER means the pulses are slowed by a power of 2: at least 0.5 s apart, ratios kept. ALREADY ≤ 2 Hz means the pulsar plays at its real rate. REAL SPEED · 4 s plays the real pulses for 4 s; faster than 40 a second sounds like a tone.
- The SIMULATION tag: the sounds are not recordings from space; they are generated on this device from real periods and frequencies. The bottom line of the source card says what is data and what is representative: Jupiter's position and the behaviour of the Sun and a fast radio burst are representative.
Sources and what you hear
| Source | Data | What you hear |
|---|---|---|
| Pulsar | Rotation period (ATNF catalogue) | One click per turn; in slow mode the period is multiplied by 2ⁿ to ≥ 0.5 s |
| 21 cm line | 1420.405752 MHz (Hellwig et al. 1970) | A narrow band 22 octaves lower, ≈ 338.7 Hz |
| Jupiter | ≈ 10-40 MHz from the ground; L and S bursts | Swelling hiss and crackle |
| Sun | Type III burst: the frequency drifts from high to low | A falling whistle |
| Fast radio burst | A single dispersed pulse lasting milliseconds | A slowed-down falling sweep |
| Cosmic background | 2.72548 K (Fixsen 2009) | The same hiss from every direction |
What is a pulsar, and why a click?
A pulsar is a rapidly spinning neutron star. The radio beam from its magnetic poles sweeps around like a lighthouse; each time the beam crosses the Earth, a radio telescope receives a short pulse. The interval between pulses is the star's rotation period and is remarkably stable.
The tool plays each pulse as a click. The Crab Pulsar turns about 30 times a second and Vela 11 times; in slow mode these rates are slowed by powers of 2, keeping their ratios. Millisecond pulsars turn hundreds of times a second: at real speed the pulses merge and are heard as a tone.
Why is real speed only 4 seconds?
As a rule, Frekans Studio does not use regular pulses repeating between 4 and 40 times a second in its sounds; this is why pulsars are slowed by powers of 2 in slow mode. For those who want to hear the real speed, the Observatory makes a short exception: only when you start it, only for 4 seconds, and only in this tool. The screen does not show the fast pulses; the waterfall draws the slow sequence.
What do the receiver and the dish simulate?
A radio telescope's dish listens to a small area of the sky; the beam widens with the wavelength, so at low frequencies the dish hears a wider area. The receiver listens to a certain frequency band. A source is heard only when both are right: the dish points at it and the receiver is in its band. For simplicity the tool's capture area is about 5° at every frequency; the BEAM line gives the real beam width of the 25 m dish at that frequency.
Radio waves below 10 MHz are reflected by the Earth's ionosphere, so ground-based telescopes hear Jupiter only above that. The cosmic background, on the other hand, shines in the microwave range, around hundreds of GHz.
Frequently asked questions
- Is this a real radio telescope?
- No, it is a simulation. The sources' periods and frequencies come from published data; the signals are generated on this device. The sounds were not recorded in space.
- Is this the sound of space?
- Sound does not travel through the vacuum of space. Radio telescopes receive radio waves, not sound; the tool moves the measured rhythms and frequencies of those waves into the audible range. This is called data sonification.
- Where is the logbook stored?
- Only on this device. The signals you add to the logbook are not sent to an account or a server; clearing the browser's data clears the logbook too.
- What does Turn into music do?
- Each signal in the logbook takes a role: pulsars become rhythm (their periods become beats by powers of 2, keeping their ratios), the 21 cm line a drone, Jupiter texture, the Sun a gesture, a fast radio burst an accent, the cosmic background the floor. If the logbook is empty, an example piece plays.
Listen and try
· v1.15 · changelog