Ghost Radio
Turn the dial: Morse, time signals, teletype and lost stations rise out of the static. The band is endless; every frequency has its own station, always in the same place.
Ghost Radio
Turn the dial or Scan.
7,215.0kHz
STEP
FILTER
NORMAL · 2.4 kHzMorse and teletype at ≤ 20 signs a second, only when tuned to a station.
Station logbook
0 STATIONSThe logbook is empty. When you find a station, press “Write in logbook”.
What is on the band?
SEVEN KINDS OF BROADCAST- StaticBetween stations: the atmosphere's hiss and crackle.
- MorseA keyed carrier; as you detune, the beat tone's pitch changes. The decoder writes the letters.TONE
- Time signalA tick each second, a long tone at the start of the minute. The clock is this device's clock.TONE
- TeletypeKeying that moves back and forth between two tones (FSK), 12 signs a second.TONE
- SweepA tone slowly sweeping the band: someone is looking for something.TONE
- Lost stationA wordless music broadcast from far away, fading out and coming back.BROADCAST
- GhostA pulse, a bell or a lament: patterns with no name.BROADCAST
What can you hear on shortwave?
Ghost Radio is a virtual shortwave receiver: as you turn the tuning knob, Morse code, time signals, teletype, sweeping tones, wordless music broadcasts and nameless patterns rise out of the static. The band is endless; each 5 kHz channel's station is generated from the frequency itself, so when you return to the same frequency you find the same station. It is not a real receiver, it does not imitate real stations and it contains no speech.
How does Ghost Radio work?
- Press Turn on the radio: at first you hear static.
- Drag the tuning knob, scroll the wheel over it or use the arrow keys; the Step setting chooses how many kHz each click is.
- The triangles under the dial are stations; the Scan buttons move to the next one. The S-meter shows the signal strength.
- A narrow filter cleans up Morse and teletype; a wide one fills out the music broadcasts.
- On Morse, fine-tune the dial: the decoder writes the letters under the panorama. Write a station you like in the logbook; Go takes you back there.
What is it used for?
The feel of shortwave listening
Turn the tuning knob and search for Morse, time signals and teletype rising out of the static; it is not a real receiver and does not imitate real stations.
Practise Morse code
Fine-tune a Morse station and the decoder writes out the letters. Try to recognise the letters by ear first, then check against the decoder.
Hear how the filter changes the sound
A narrow filter cleans up Morse and teletype, a wide one fills out the music broadcasts; you learn by ear what bandwidth does.
Keep a station log
Return to the same frequency and you find the same station; write the ones you like in the log and go back to them any time with the Go button.
How to read the results
- If the panorama reads STATIC, the dial is not on a station: use ‹ Scan or Scan › to move to the next one. If a broadcast name appears you have caught a station; in a reading such as MORSE · 15 WPM, WPM is words per minute (12-20).
- The S reading and the S-meter to the right of the dial show signal strength: it rises from 1 to 9 and shows 9+20 at the strongest. The triangles under the dial are stations: a large triangle is a strong station, and the colour separates TONE and BROADCAST types as in the What is on the band? list.
- The frame in the middle of the panorama is the FILTER width: 0.5, 2.4 or 6 kHz. Morse and teletype clean up in the narrowest frame, with neighbours left outside; a lost station's broad trace fills out in the widest.
- If Morse shows DECODER · FINE-TUNE, the dial is not close enough to the carrier: set STEP to 0.1 kHz and turn the knob slowly, and the letters appear under the panorama. The tone's pitch changing as you detune is not a fault; that is how a shortwave receiver works.
- VIRTUAL RADIO: no broadcast is received from outside; stations are generated from the frequency, so the same frequency always gives the same station. Band names (e.g. LIGHTHOUSE BAND) are invented, not a real band plan. The time signal follows this device's clock.
What is on the band?
| Broadcast | How it sounds | When you detune |
|---|---|---|
| Static | Hiss and random crackle | Fades when a station is found |
| Morse | A keyed tone, 12-20 words a minute | The beat tone's pitch shifts |
| Time signal | A tick each second, a long tone at the minute | The tone's pitch shifts |
| Teletype | 12 signs a second between two tones | Both tones shift together |
| Sweep | A rising tone every 5 s | The tone's pitch shifts |
| Lost station | Wordless music that fades in and out | Turns muffled and whistles |
| Ghost | A pulse, a bell or a lament | Fades |
Why does the sound change when you detune?
Shortwave receivers mix the signal with their own internal oscillator. That is what turns a keyed carrier (Morse) into an audible tone: the further the receiver is tuned from the carrier, the higher or lower the tone. The tool simulates this; every 100 Hz of tuning moves the tone's pitch by 100 Hz.
Music broadcasts (AM) are wider. When the tuning slips, the high frequencies disappear and the sound turns muffled; the broadcast's carrier whistles against the receiver's oscillator.
Why at most 20 signs a second for Morse?
As a rule, Frekans Studio does not use regular pulses repeating between 4 and 40 times a second in its sounds. Morse keying falls in this band; Ghost Radio keeps it deliberately as an exception within the metronome's limit: at most 20 signs a second, and only when tuned to a station. The screen does not flash with the keying.
Frequently asked questions
- Is this a real radio?
- No. No broadcast is received from outside; all the stations are generated on this device from the frequency itself. It does not imitate real stations and contains no speech.
- Will I find the same station when I return to the same frequency?
- Yes. Each station's type, position and content are calculated from its frequency; the band is endless, but each channel is always the same. The frequencies you write in your logbook take you back there.
- Where is the station logbook stored?
- Only on this device. The frequencies you write in the logbook are not sent to an account or a server.
Listen and try
· v1.15 · changelog