02 / Explore · Tools05 / Menu · Tools

Spectrum analyzer

The spectrum, waveform and spectrum over time of your microphone, the playing sound or a file; the peak frequency and its note.

Spectrum analyzer

01 · SOURCE

MICROPHONE OFF

The display is slowed (a one-second average): lines don't jitter and the screen doesn't flash.

What frequency is this sound?

The spectrum analyzer shows which frequencies a sound is made of: the spectrum (log frequency, dB), waveform and spectrogram of your microphone, the sound playing on the site, or a file you choose. It marks the strongest frequency, its note and its harmonics. Sound is analysed in your browser; microphone audio is never recorded and the file never leaves your device.

How do you use the spectrum analyzer?

  1. Choose a source: microphone, playing sound (from the Library or a tool), or file.
  2. For the microphone press Turn on microphone and allow access; for a file choose it and start at a low volume.
  3. SPECTRUM shows each frequency's power; the peak frequency, its note and harmonics (dashed clay lines) are marked.
  4. WAVE is the sound's shape in time; TIME writes the last 19 seconds of spectrum in place at the cursor.
  5. The display is slowed with a one-second average: fast changes are smoothed out and the screen does not flicker.

What is it used for?

  • See an instrument's harmonics

    Play a single note into the microphone; the analyser marks the fundamental and its harmonics. Comparing the same note on different instruments shows that timbre comes from how the harmonics are spread.

  • Track down a hum

    The hum of a fridge, a computer fan or the mains (50 or 60 Hz and its multiples, depending on the grid) shows up as a steady line in the spectrum; knowing the frequency helps you find the source.

  • Inspect the sound playing on the site

    Open the spectrum and spectrogram of a session playing on the site to see which frequencies make up the sound and how it changes over time; the sound is generated on your device, so no microphone is needed.

  • Look at a recording's spectrum

    Pick an audio file and look at its spectrum: you see which bands are strong in the recording and which are weak. The file never leaves your device.

How to read the results

  • The highest peak is usually the sound's fundamental; evenly spaced peaks to its right are harmonics, marked with clay dashed lines.
  • A narrow, steady peak is a continuous hum (e.g. 50 Hz mains hum); a broad, even spread is noise.
  • dB values are relative to the digital signal: −20 dB is 40 dB stronger than −60 dB. They don't show sound pressure in the room.
  • In the TIME view (spectrogram) horizontal lines are sustained tones and vertical lines are short hits; colour shows the power at that moment.

Views

All three are different faces of the same sound.
ViewWhat it showsUseful for
SpectrumPower by frequency (log 20 Hz-20 kHz, dB)Timbre, hum, whistle, harmonics
WaveThe sound's shape in time (scaled to its peak)Waveform, clipping, period
TimeSpectrum of the last 19 seconds (spectrogram)Changing sounds, melody, speech

How to read a spectrum

The horizontal axis is frequency on a log scale: each octave takes the same width, as the ear hears it. The vertical axis is decibels: a sound at −20 dB is 40 dB stronger than one at −60 dB. A single instrument note leaves a peak at its fundamental and fading harmonics at its multiples.

A steady hum shows as a narrow, constant peak; noise shows as a broad spread. Values describe the digital signal; they do not show sound pressure in the room.

Frequently asked questions

Is the microphone audio recorded?
No. Sound is only analysed live inside your browser; it is not recorded, stored or sent. The microphone opens with the button and closes when you leave the page or switch tabs.
Why is the display delayed?
The display is a one-second average: fast-changing lines and flicker tire the eyes and can bother some people. The average makes the lasting structure of the sound, its timbre and harmonics, readable.
How do I measure a file's loudness?
The audio file analyzer measures the whole file: integrated LUFS, true peak, RMS, clipping and stereo correlation.

· v1.15 · changelog

No cookies, no tracking. Details: Privacy notice (KVKK) On-device storage