02 / Explore · Tools05 / Menu · Tools

Microphone test

Is your microphone working, how strong is it, is it clipping: live level, peak and device details. Nothing is recorded.

Microphone test

INPUT LEVEL · dBFSMICROPHONE OFF
NO INPUT
PEAK
—
STATUS
—

The clipping marker stays and does not flash; Reset peak clears it. For speech a peak between −12 and −6 dBFS is comfortable. Nothing is recorded or sent; the microphone closes when you leave the page.

Is my microphone working, is it clipping?

The microphone test shows live whether your microphone works and how strong it comes in: an 8-second level trace, the current level, held peak and a clipping marker, plus the input device and sample rate. Sound is measured in your browser; it is never recorded, stored or sent.

How do you test your microphone?

  1. Press Turn on microphone and allow microphone access in your browser.
  2. Speak normally or play your instrument; if the trace rises, the microphone works.
  3. For speech a peak between −12 and −6 dBFS is comfortable; below −40 is very quiet, touching 0 is clipping.
  4. If you have several microphones, choose one from the list; the chosen device opens at once.
  5. The clipping marker stays: after lowering the gain, clear it with Reset peak.

What is it used for?

  • Check before a video call

    Before a call, see whether your microphone works and how strong your voice comes through; if the trace rises, the microphone is working.

  • Pick the right microphone

    If there are several microphones, pick one from the list; the chosen device opens right away, so you can compare your headset microphone with the computer's.

  • Set your recording level

    While you speak, a peak between −12 and −6 dBFS is comfortable; below −40 is very quiet, and touching 0 is clipping. After lowering the gain, use Reset peak.

  • Your sound stays on your device

    The sound is measured in your browser; it is not recorded, stored or sent anywhere.

How to read the results

  • If the peak sits between −12 and −6 dBFS while you speak, the level is comfortable: good for recording and calls.
  • If the clip mark is lit, the signal reached 0 dBFS: lower the microphone gain or the source, then clear the mark with Reset peak.
  • If the peak stays below −40 dBFS the sound is very quiet: check the device, the browser permission and whether the input is muted.
  • If the trace doesn't move at all, the browser may be listening to another input: pick the right microphone from the list.

Reading the level

dBFS is measured against the digital ceiling (0 dBFS); it does not show sound pressure in the room.
Peak (dBFS)StatusWhat to do
0 and aboveClippedLower the microphone gain or the source
−6 … 0HighClose to clipping; move back a little
−12 … −6ComfortableGood for speech and instruments
−40 … −12Quiet but usableMove closer or raise the gain if needed
Below −40Very quietCheck the device, the permission and any muted input

Why is audio processing off?

Video calls apply echo cancellation, noise suppression and automatic gain to the microphone, which keep changing the level. The test asks for these to be off so you see the microphone's own signal: the level shown is the true output of the microphone and its gain setting.

Frequently asked questions

Is my voice recorded or sent anywhere?
No. Sound is only read for its level inside your browser; nothing is recorded, stored or sent. The microphone opens with the button and closes when you press Turn off microphone, leave the page or switch tabs.
The trace doesn't move at all.
Check the browser's microphone permission, your operating system's privacy settings and any mute switch on the device. If another input device is listed, choose it.
Why can't I record and play back?
The tool deliberately doesn't record: we never keep your sound. To hear your microphone, use your call app's own test feature.

· v1.15 · changelog

No cookies, no tracking. Details: Privacy notice (KVKK) On-device storage