What is a decibel? The ratio measure of level
Microphone test

Ratio, logarithm, reference
A decibel is the logarithm of a quantity's ratio to a reference: for pressure, 20 · log₁₀(p / p₀). Every doubling adds +6 dB and every tenfold step +20 dB; 0 dB does not mean 'no sound', it means 'equal to the reference'. Without a reference a decibel is meaningless: dB SPL measures pressure in air against 20 micropascals, dBFS measures a digital signal against the largest value it can take, and LUFS measures perceived loudness through an ear-weighted filter.
Because the scale is logarithmic, the gap between 60 and 80 dB is not 'thirty percent' but ten times the pressure. Values such as '−12 dB' on a session card are ratios too: the layer's level relative to the main sound.
The ear and loudness
Perceived loudness does not grow linearly with decibels: at moderate levels about +10 dB is heard as 'twice as loud', while +3 dB is just noticeable. Nor is the same level heard equally loud at every frequency: according to equal-loudness contours a 50 Hz tone needs a much higher level to sound as loud as a 3 kHz tone. That is why session equalisation uses ear-weighted LUFS rather than plain decibels.
Digital audio: dBFS and the limiter
The largest value a digital signal can take is 0 dBFS; anything above it is clipped and crackles. Frekans Studio's main chain limits the true peak at −1 dBFS, raises level by at most 6 dB per second and equalises every session to the same LUFS target; the quality report of an exported file states LUFS, true peak and clipping, and the Audio file analyser makes the same measurement on your own files.
Why we do not recommend a level in decibels
dBFS measures the signal, not the pressure reaching your ear. The same file produces a completely different dB SPL depending on the device's volume setting, the headphones' efficiency and how they sit on the ear; a browser has no way of knowing. That is why the site gives no 'this many decibels' recommendation; the measure is to keep the sound below speaking level and to take breaks during long listening. The safe listening article has the details.
What does the evidence say?
Context · not a claim
According to Suzuki and Takeshima's 2004 equal-loudness contours, the same sound pressure level is not heard equally loud at every frequency: low frequencies need a much higher level for the same loudness, and the region around a few kHz needs the least.
Moore's textbook summarises the relation between perceived loudness and level: at moderate levels an increase of about 10 dB roughly doubles loudness; the decibel itself is a ratio measure, not an absolute unit.
Evidence levels and sources come from the database; the article adds no new claims. Evidence methodology
Studies
| Work | Type | n | Finding | Level |
|---|---|---|---|---|
| Moore 2013[2] | Textbook | — | A standard textbook of auditory perception. Its chapter on frequency selectivity and masking describes how one sound raises the detection threshold of another (auditory masking) and how this depends on frequency bands. | |
| Suzuki 2004[1] | Experiment | 12 studies | Brings together the results of 12 studies from the mid-1980s onwards to propose new equal-loudness-level contours for pure tones. Differences from the 1956 Robinson and Dadson contours are greatest below 500 Hz and often reach 14 dB. |
Frequently asked questions
- How much difference does +3 dB make?
- Twice the power, 1.41 times the pressure; to the ear, a just-noticeable increase. 'Twice as loud' takes about +10 dB.
- Is there a conversion between dBFS and dB SPL?
- No fixed one. The same dBFS value produces a different pressure depending on the device, the volume setting and the headphones; measuring it takes a calibrated sound level meter.
Who is it for?
For whom
- Anyone looking for sound for relaxation, focus or a sleep routine; the sounds are generated on your device and promise no effect.
- Anyone who wants to read the evidence level of what they listen to.
- Anyone who wants to read the dB values on session cards and the export report; dB is a ratio, and a browser cannot know the pressure reaching your ear.
Not for whom
- If you have epilepsy or a history of seizures, a psychiatric diagnosis, a medical device such as a pacemaker, tinnitus or any other health condition, or if you are pregnant, consult your doctor before use.
- Do not listen while driving or operating machinery.
- Keep your device volume comfortable, preferably below 60%. You can also use your device's headphone-safety settings.
Frekans Studio is not a medical device; it does not diagnose, treat or prevent any disease.
Listen and try
Sources
- Suzuki Y, Takeshima H. Equal-loudness-level contours for pure tones. J Acoust Soc Am. 2004;116(2):918-933. doi:10.1121/1.1763601 PMID 15376658
- Moore BCJ. An Introduction to the Psychology of Hearing. Brill; 2013. ISBN 9789004252424
Citations come from the evidence database; every source is verified with Crossref or PubMed. Links go to the publication's own page (DOI).
Where to go next
Method
- Sources
- This article is not linked to a claim in the evidence database; it explains the technique and its use.
- Editorial responsibility
- Murat Tunalı · Editorial responsibility lies with Murat Tunalı; no independent medical review has been carried out.
- How this article was prepared
- The first draft was prepared by an AI model (Claude); the article adds no new figures, citations or claims, and the evidence summary comes from the database. Murat Tunalı approved publication. No independent scientific adviser has reviewed it yet. Evidence methodology · Credits
- Limitations
- This article is for information only; it is not medical advice. Evidence levels are per claim; a session's level is the weakest of its linked claims.
- Updates
- Last updated: 4 November 2026
- Cite as
- Frekans Studio. “What is a decibel? The ratio measure of level”. Last updated: 4 November 2026. https://frekans.studio/en/guide/what-is-a-decibel